Knowledge

Development status and gap of key Nonwovens

Jun 16, 2021 Leave a message

1) Melt spinning web forming process

 

Melt spinning web forming process is the most widely used process in Nonwovens Industry in China, which accounts for nearly half of the total nonwovens production. However, there is still a big gap between the domestic technology level and the international advanced level. For example, at present, the fineness of spunbonded fiber in China is 1.8-2.0d, only a few machines can approach 1.3d, while the fineness of spunbonded fiber in foreign advanced countries is about 1.0-1.1d, typically up to 0.7d; The elongation at break of domestic spunbond products is rarely less than 70%, while that of foreign products can reach 40% ~ 50%. In recent years, the two-component and multi-component composite spunbond process has become the main direction of the development of advanced technology. Developed countries have been able to manufacture a variety of two-component composite fiber cross-section structure products, and have made breakthroughs in three-component and four component fiber technology. Although hot rolling and Spunlaced products of two-component composite spunbond process have been developed in China, the large-scale two-component production lines basically need to be imported from abroad, and the development still needs to learn from foreign technology and use patented products.

 

    2) Flash spinning process

 

Flash spinning process is the "top technology" of Nonwovens Technology, which has super high spinning speed and less spinning solvent (compared with dry and wet process); The fiber produced by this process has the advantages of high strength and light weight, and its diameter is 400-1000 nm. At present, DuPont is the only company in the world to master the technology and product industrialization ability, "Tyvek" is the trade name of its products. Restricted by the foreign patent protection system, the domestic flash spinning process has been in the exploratory stage. Represented by Tianjin University of technology and Xiamen dangsheng New Material Co., Ltd., Textile Universities and a few equipment manufacturing enterprises have carried out some research and industrialization exploration in this aspect, and have also made some phased achievements in pilot process technology and equipment, There is still a long way to go for industrial application. Few enterprises and personnel have studied the selection of main solvent in the preparation of flash spinning solvent, which is the key step of flash spinning process.

 

    3) Spinning technology of cellulose fiber

 

Cellulose mesh is widely used in biomedical field because of its biodegradability and biocompatibility. Lyocell solution / melt blown technology, as the representative of cellulose fiber spinning technology, has made great progress abroad as early as the late 1960s. Lenzing is a typical representative and technology leader in this field. For example, "web technology", launched in 2019, weighs 15-60g / m2 and has a fiber diameter range of 5-40 μ m。 At present, China has a complete set of Lyocell fiber production and chemical equipment, process, safety, automatic control and engineering technology system, and has the technical ability of engineering design, engineering implementation and rapid industrialization promotion. In 2018, China Academy of Textile Sciences successfully developed large-scale integrated technology and equipment for film evaporation, continuous dissolution and defoaming, dry jet wet spinning technology and equipment for high viscoelastic spinning stock solution, and NMMO solvent low-temperature evaporation concentration recovery technology and equipment. At present, the Lyocell fiber production line with an annual output of 15000 tons has been built, and the related products have been applied in the fields of clothing, home textiles, industrial textiles, etc.

 

Send Inquiry